Plex hosting means running Plex Media Server on a machine in a data centre instead of at home. Your library then streams from a fast, always-on connection. For that, the server needs a CPU sized for transcoding, disks for the library and a port that every viewer can reach. Plex also charges for remote streaming, and on a hosted server every stream is remote, so the plan changes the maths.
This guide explains what the server must do, what a Plex Pass changes, which dedicated server fits each case and how to set it up. Its sources are Plex’s own support pages, the PassMark CPU benchmark, Wikipedia and Swify’s plans.
📖 Not sure Plex is the right app?
Read Jellyfin vs Plex: Which Media Server Needs the Bigger Server? for the cost, the remote streaming rules and how many streams each plan handles.
What Is Plex Hosting?
Plex hosting is Plex Media Server running on a rented server instead of at home. Before you rent, compare four places to run it: your home PC, a VPS, a seedbox or a dedicated server. The software is the same in all four, but the hardware under it is not. That decides how well it streams.
Four places to run Plex Media Server
| Home PC | VPS | Seedbox | Dedicated server | |
|---|---|---|---|---|
| Hardware transcoding | Yes, with a Plex Pass | No, Plex says VMs cannot | Depends on the provider | Yes, on a GPU server |
| CPU for software transcoding | Yours | Shared | Shared | All of it, yours |
| Upload for viewers | Your internet plan | Plan limit | Fast | 1 Gbps unmetered |
| Terms for running Plex | Allowed | Check the terms | Some limit it | Full control |
Table comparing four places to run Plex Media Server: a home PC supports hardware transcoding with a Plex Pass, uses your own CPU and is limited by your internet upload; a VPS cannot do hardware transcoding because Plex says virtual machines cannot, and shares the CPU; a seedbox depends on the provider for hardware transcoding, shares the CPU and some providers limit Plex; and a dedicated server supports hardware transcoding on a GPU server, gives you all of the CPU and offers a 1 Gbps unmetered port with full control.
Can a VPS Handle Plex Hosting?
Only in part, because a VPS cannot use a graphics card for transcoding. The Plex support page on hardware-accelerated streaming says it is not possible inside virtual machines. The host does not expose the video hardware to the guest. A seedbox is built for downloading, so read its terms before you put Plex on it.
📖 New to running your own media server?
Read Self-Hosted Media Server: What It Is and How It Works for how a media server works and where to run it.
What Does Plex Hosting Need to Run?
Plex hosting needs three things sized to your viewers: a CPU for any video the server must convert, disks for the library, and a port wide enough for every stream. The official minimum is small. What drives the size is how many viewers need their video transcoded, because direct play costs almost no CPU.
How Much CPU Does Plex Hosting Need?
Plex’s rule is about 2,000 PassMark points of CPU for each 1080p stream that must be transcoded. The Plex CPU guide also lists 12,000 points for a 4K SDR stream and 17,000 for 4K HDR. Those figures assume bitrates of 10, 40 and 50 Mbps.
A server on a hosted plan serves viewers over the internet, so many of them use phones or browsers that need conversion. Count your simultaneous transcodes, not your viewers, and divide the CPU score by the rule.
Does Plex Hosting Need a Plex Pass?
Either a Plex Pass or Remote Watch Passes, because every stream from a data centre is remote. Since April 2025, remote streaming of your own media needs a Plex Pass on the server. The alternative is a Remote Watch Pass for each viewer, as Wikipedia notes.
The two routes cross at the third viewer. A Remote Watch Pass costs $29.99 a year per viewer, and a Plex Pass costs $69.99 a year.
From the third remote viewer, a Plex Pass costs less than Remote Watch Passes
Yearly cost in US dollars, by number of remote viewers.
1 viewer
3 viewers
5 viewers
10 viewers
Prices as reported in 2026: $29.99 a year per viewer and $69.99 a year. Check plex.tv for the current prices. Our arithmetic.
Bar chart of yearly cost in US dollars: Remote Watch Passes cost 29.99 for one viewer, 89.97 for three, 149.95 for five and 299.90 for ten, against a flat 69.99 for a Plex Pass.
A Plex Pass also unlocks hardware transcoding, but it only helps on a server with a graphics card. The Plex Pass page lists the current prices.
📖 How many transcodes can a server handle?
Read Video Transcoding Server: CPU, GPU, and What to Check Before You Rent for how to size the CPU and when a GPU pays off.
Which Dedicated Server Should You Rent for Plex Hosting?
Plex server hosting comes down to three plans, and the CPU decides it. Dedicated 1 handles a few remote viewers, Dedicated 5 a family with mixed devices, and Dedicated 7 many viewers or 4K. The table applies Plex’s rule to each plan’s PassMark score.
Transcodes each Swify plan can run, by Plex’s rule
| Plan | CPU | Price | Up to 1080p / 4K SDR / 4K HDR | Fits |
|---|---|---|---|---|
| Dedicated 1 | Xeon Gold 5215 | €120 | 7 / 1 / 0 | Mostly direct play, a few remote viewers |
| Dedicated 5 | Xeon Gold 6138 | €175 | 11 / 1 / 1 | A family with mixed devices |
| Dedicated 7 | 2 x Xeon Gold 6138 | €260 | 20 / 3 / 2 | Many viewers, or 4K |
| GPU server | Quoted on request | On request | Hardware transcoding | Heavy 4K with a Plex Pass |
Table of transcodes each Swify plan runs by Plex’s rule: Dedicated 1 at 120 euros runs 7 streams up to 1080p, 1 at 4K SDR and none at 4K HDR; Dedicated 5 at 175 euros runs 11, 1 and 1; Dedicated 7 at 260 euros runs 20, 3 and 2; and a GPU server, quoted on request, adds hardware transcoding.
Each count divides the CPU’s PassMark score by Plex’s 2,000, 12,000 or 17,000 points, for one type of stream at a time, so they do not add up. Standard Swify plans have no graphics card, so the CPU does the work. A GPU server is quoted to order.
How Do Storage and Bandwidth Fit Plex Hosting?
The builder lets you add drives for the library. A 1 Gbps unmetered port carries about 100 direct-play streams of 1080p at a bitrate of 10 Mbps.
Size Your Plex Server in the Builder
Pick the CPU, the drives and the port for your library, with Debian or Ubuntu included at no extra cost.
→ Configure Your ServerHow Do You Install Plex on a Dedicated Server?
Hosting a Plex server comes down to five steps: install Plex from its official repository, claim the server through an SSH tunnel, add your libraries and open port 32400.
- Choose the system. Debian or Ubuntu are the safe picks, as our Linux distro guide explains.
- Install Plex. Add Plex’s repository from its download page, which lists the current address and signing key, then install the
plexmediaserverpackage. Updates then arrive with your normal system updates. - Claim the server. Plex opens its setup only for
localhost. Tunnel to the server over SSH and sign in with your Plex account. - Add the libraries. The service runs as the
plexuser, so it needs read access to your media folders. - Open the port. Allow 32400 in the firewall, then enable Remote Access in Plex’s settings.
# On your own computer: open a tunnel to the server
ssh -L 32400:localhost:32400 your_user@your_server_ip
# Then browse to http://localhost:32400/web and sign in
# On the server: allow Plex's port
sudo ufw allow 32400/tcpIn Plex, open the server’s Remote Access setting and enable it. If the test fails, tick the option to specify the public port manually and enter 32400. A successful test reports that the server is fully accessible outside your network. Plex lists every other port it can use in its network ports guide, and most are not needed on a server.
Which Ports Does a Plex Server Need Open?
Only port 32400 over TCP, plus SSH. The other ports Plex lists are for discovery and DLNA on a local network, and a hosted server does not need them.
Plex’s ports and what to do with them on a server
| Port | What it is | On a hosted server |
|---|---|---|
| 32400 TCP | The web interface and the streaming port | Open it |
| 22 TCP | SSH, for the tunnel and for you | Open it, with keys only |
| DLNA ports | Discovery and streaming to DLNA devices | Keep closed |
| Local discovery ports | Finding the server on a home network | Keep closed |
Table of Plex’s ports and what to do on a hosted server: port 32400 over TCP carries the web interface and streaming, so open it; port 22 over TCP is SSH for the tunnel and for you, so open it with keys only; the DLNA ports handle discovery and streaming to DLNA devices, so keep them closed; and the local discovery ports find the server on a home network, so keep them closed.
If you prefer containers, Plex publishes an official image, pms-docker. It claims the server with a token from plex.tv/claim, which expires after four minutes.
How Do You Keep Plex Hosting Secure and Backed Up?
Keep SSH on keys, open only what Plex needs, update through the repository and back up Plex’s data folder separately from your media. A Plex server holds your library’s database, artwork and viewing history, and rebuilding it by hand can take days.
What to back up on a Plex server
| What | Where it lives | Note |
|---|---|---|
| Plex data | /var/lib/plexmediaserver/Library/Application Support/Plex Media Server | Database, artwork and settings. Copy it before every upgrade |
| Built-in backup | Settings, Scheduled Tasks | Plex can back up its database every three days |
| Your media | Your media folders | Not covered by Plex’s backups |
Table of what to back up on a Plex server: the Plex data folder under /var/lib/plexmediaserver, which holds the database, artwork and settings and should be copied before every upgrade; the built-in backup under Settings and Scheduled Tasks, which can back up the database every three days; and your media folders, which Plex’s backups do not cover.
sudo systemctl stop plexmediaserver
sudo rsync -a "/var/lib/plexmediaserver/Library/Application Support/Plex Media Server/" /backup/plex/
sudo systemctl start plexmediaserverMirrored disks protect you from a drive failing, but they copy a deletion as faithfully as a file. Keep one backup copy on another machine.
📖 Is RAID a backup?
Read What Is RAID? How It Protects Dedicated Servers for what mirrored disks do and do not cover.
Keep the library to media you own or have the right to share. Wikipedia notes that Plex has often been associated with copyright infringement, and the software itself is legal in every case.
Plex Hosting: The Short Version
Plex hosting works best on a dedicated server with a CPU sized for your transcodes. Add a Plex Pass for remote viewers, pick the plan by the streams that need conversion, and install from Plex’s own repository.
- A VPS cannot do hardware transcoding, because Plex says virtual machines cannot.
- The CPU decides the size: about 2,000 PassMark points per 1080p transcode.
- A Plex Pass costs less than Remote Watch Passes from the third viewer.
- Back up Plex’s data folder separately from your media.
Host Your Plex Server on Dedicated Hardware
Swify dedicated servers start at €120 a month, with full root access, 1 Gbps unmetered bandwidth and your choice of Debian or Ubuntu. Hosted in the Netherlands on AMS-IX, with monthly billing and no long contracts.
→ Explore Swify Dedicated ServersFrequently Asked Questions
What is Plex hosting?
Plex hosting means running Plex Media Server on a rented server, often a dedicated one, instead of at home. The library streams from a data centre connection, so your home upload speed no longer limits your viewers.
How much does Plex hosting cost?
A Swify dedicated server starts at €120 a month, and a Plex Pass has been reported at $69.99 a year, or about $6 a month. Remote Watch Passes at $29.99 a year per viewer are the alternative.
Read Jellyfin vs Plex: Which Media Server Needs the Bigger Server? for the full cost comparison.
Can I run Plex on a VPS?
Yes, but with limits. Plex says hardware-accelerated streaming is not possible inside virtual machines, so a VPS transcodes in software on a shared CPU. For more than a few viewers, a dedicated server is the safer choice.
Read Dedicated Server vs VPS: Which One Do You Actually Need? to compare the two.
Do I need a Plex Pass for Plex hosting?
Either one, in practice. Since April 2025, remote streaming of your own media needs a Plex Pass on the server or a Remote Watch Pass for each viewer, and every stream from a data centre is remote. A Plex Pass costs less from the third viewer.
How many streams can a dedicated server handle?
It depends on how many must be transcoded. Plex’s rule is about 2,000 PassMark points per 1080p transcode, so Dedicated 5 runs about 11, while a 1 Gbps port carries about 100 direct-play streams.
Read Video Transcoding Server: CPU, GPU, and What to Check Before You Rent to size your server.
How do I claim a Plex server with no screen?
Open an SSH tunnel from your computer to port 32400 on the server, then browse to localhost on port 32400. Plex starts its setup only for localhost, so a direct visit to the server’s address does not work.
Read SSH Security: Brute Force Protection for Hosting to secure the connection.
Which port does Plex use?
Plex uses TCP port 32400 for its web interface and streaming. On a hosted server, that is the one port to open to the internet, besides SSH.
Is Plex hosting legal?
The software is legal. What you stream must be media you own or have the right to share, because Wikipedia notes that Plex has often been associated with copyright infringement.
Is Plex better than Jellyfin on a hosted server?
It depends on cost and apps. Plex has the wider app support but charges for remote streaming, while Jellyfin is free software with no paid tier.
Read Jellyfin Hosting: What It Needs and What to Run It On for the Jellyfin side.
How do I start hosting a Plex server?
Rent a dedicated server, install Plex from its official repository, claim the server through an SSH tunnel, add your libraries and open port 32400. The whole job usually takes under an hour.
Read Best Linux Distro for Server: How to Choose for Your Workload to pick the system.
How much storage does a Plex library need?
At 10 Mbps, one terabyte holds about 222 hours of 1080p video, but only about 56 hours of 4K SDR at 40 Mbps and 44 hours of 4K HDR at 50 Mbps. Plan the drives for the bitrate of your files.
Read Self-Hosted Media Server: What It Is and How It Works for the storage maths.

